Skip to content
İmsan San. Sit. Karatay / Konya +90 332 248 25 36 info@altinbasakdisli.com.tr
Steel Sprockets
1.3.10

Steel Sprockets

A steel sprocket transmits power with roller chain. Choosing pitch and tooth count, signs of wear and why chain and sprockets should be replaced together.

+90 532 627 88 38
Product code
1.3.10
Product group
Manufacturing Group
Manufacturer / Supplier
Altınbaşak Dişli Sanayi
Origin
Türkiye
Catalogue
PDF

In other languages

Product guide

What is a steel sprocket?

A steel sprocket is a wheel that transmits power by taking the links of a roller chain between its teeth. In mills it is used on conveyor, screw, feed and coupling drives. Steel keeps the tooth shape under shock-loaded, dusty conditions.

What to watch when choosing

  • Pitch: the sprocket pitch must exactly match the chain pitch (e.g. 1/2", 5/8", 3/4").
  • Number of strands: choose a sprocket for single, double or triple strand chain.
  • Tooth count: the ratio of the two tooth counts gives the speed ratio. Very small sprockets with few teeth cause chain vibration and rapid wear.
  • Hub: keyed, taper-bushed or weld-on hubs are chosen to suit the shaft connection.

How to spot wear

The teeth of a new sprocket are symmetrical. As it wears, the teeth thin on the pulling side and take on a hooked shape. Other signs: pointed tooth tips, shiny marks on the tooth sides and the chain catching as it leaves the sprocket. A hooked sprocket struggles to release the chain, which can end in a broken chain.

Chain and sprocket together

Chain and sprocket wear in to each other. Fitting a new chain on a worn sprocket, or a new sprocket on a stretched chain, noticeably shortens the new part’s life. Replacing chain and sprockets together is therefore recommended. Aligning sprockets in one plane and setting chain sag correctly also extend life.

Frequently asked questions

How is the sprocket pitch determined?

From the chain pitch; the sprocket must match the chain. The pitch can be found from the chain code (e.g. 08B, 10B, 12B).

How can I tell a sprocket is worn?

Hooked teeth, pointed tips and shiny marks on the tooth sides mean the sprocket is worn.

Is replacing only the chain enough?

Not if the sprockets are worn; the new chain will stretch quickly. Replacing chain and sprockets together is recommended.